 |
| Quantity: | |
|---|---|
J41 TAPPING CHUCK SET
This device is consisted of a tap chuck and tap collets. The chuck has compensating device for thread pitch.Collet chuck has overload torque protection device,which avoid tap breaking. In order to get the different release torques for different diameter taps,just adjust nuts.This device is most applicable to tap working on drill,lathe,boring machine,milling machine and CNC machine center and so on.
| Item No. | Shank taper | D mm | D1 mm | d mm | L1 mm | L mm | Tapping range | Torque Nm | Wt(kg) |
| J4112-MS2 | MS2 | 46 | 17.780 | 19 | 75 | 171.5 | M3-M12 | 25 | 1.08 |
| J4112-MS3 | MS3 | 46 | 23.825 | 19 | 94 | 191 | M3-M12 | 25 | 1.28 |
| J4112-MS4 | MS4 | 46 | 31.267 | 19 | 117.5 | 216 | M3-M12 | 25 | 3.00 |
| J4116-R8 | R8 | 46 | 31.75 | 19 | 101.6 | 193.6 | M3-M16 | 46.3 | 1.71 |
| J4116-MS2 | MS2 | 46 | 17.780 | 19 | 75 | 171.5 | M3-M16 | 46.3 | 1.08 |
| J4116-MS3 | MS3 | 46 | 23.825 | 19 | 94 | 191 | M3-M16 | 46.3 | 1.61 |
| J4116-MS4 | MS4 | 46 | 31.267 | 19 | 117.5 | 216 | M3-M16 | 46.3 | 3.00 |
| J4124-MS3 | MS3 | 66 | 23.825 | 30 | 94 | 227 | M12-M24 | 150 | 3.20 |
| J4124-MS4 | MS4 | 66 | 31.267 | 30 | 117.50 | 252 | M12-M24 | 150 | 3.60 |
| J4124-MS5 | MS5 | 66 | 44.399 | 30 | 149.5 | 284 | M12-M24 | 150 | 4.50 |
| J4112 tapping range | M3 | M4 | M5 | M6 | M8 | M10 | M12 |
| 67type d1xa(mm) | 4X3 | 4X3 | 5X3.8 | 6X5 | 6X5 | 8X6.3 | 9X7.1 |
| 83type d1xa(mm) | 2.24X1.8 | 3.15X2.5 | 4X3.15 | 4.5X3.55 | 6.3X5 | 8X6.3 | 9X7.1 |
| J4124 tapping range | M12 | M14 | M16 | M18 | M20 | M22 | M24 |
| 67type d1xa(mm) | 9X7.1 | 10.5X8 | 12.5X10 | 14X11 | 16X12 | 18X14.5 | 20X16 |
| 83type d1xa(mm) | 9X7.1 | 11.2X9 | 12.5X10 | 14x11.2 | 14x11.2 | 16x12.5 | 18x14 |
